High pressure pump, Injector, IMV automatic test,
Magnetic coil test, Piezo actuator test, Circuit defective test
MT-5600 is a CRDI injector test bench which can remanufacture injector, high pressure pump. IMV test, engine knocking test
I-CRDI “MT-5600”

The world’s first realization of Automatic Piezo Injector Seat (option)


Simultaneous measurement of Load cell and cylinder
Automatic analysis by Load cell

Speed up your work with accuracy within the margin of error of 0.5cc and convenience of work
Automatic cylinder

Easy to present defect status to customers visually
Auto detection of injector and the measurement of resistance

Measure resistance and open, short circuit automatically upon connecting an injector
Real-time display of injector waveform

Piezo injector display voltage waveform automatically (Voltage control)
Solenoid injector display current waveform automatically (Current control)
The first test function of Piezo actuator in Korea
Piezoelectric actuator test tells poor starting or shut off while driving
Function to check the capability of the normal piezo actuator

The first test function of injector magnetic force in Korea
Function to check the magnetic force and the injector’s status that cannot be remanufactured due to the coil aging

The first test function of Circuit defective in Korea
Function to inspect short circuits or other circuit problem for 4 injectors simultaneously

Manual Mode

World wide data support
(Automatic update)


Various injector tester
|
|
|
IMV Test
Normal IMV graph

Abnormal IMV graph

Able to judge the IMV failure if there a pressure deviation by adjusting the target pressure and current pressure on rail with IMV
High pressure pump & IMV
|
|
|
Test of various pumps by flow sensor



Various exclusive adaptors
(optional : supply of connectors and adaptors for imported cars)

The rebuilding of large and medium injectors (optional)

Low current system by the technology of inverter control

Wide test space

System
|
|
|
SPECIFICATION
Product Name | MT-5600 Load Cell |
Injection Time | 0 – 1600㎲ |
Testable Injectors | Bosch, Delphi, Denso, Siemens Piezo, Bosch Piezo, Denso Piezo, Caterpillar |
Output | 4 Channels |
Cooling | Forced cooling |
Pressure | 0-2000bar (Based on option, Maximum 2,700bar) |
Power | 110~380V 50/60Hz |
Motor | 3phase, 3HP, 6pole (Optional : 5HP, 6pole) |
Oil Tank | 40L |
Size | 1375x750x1700 (mm) |
* Product specifications could be modified without prior notice to improve system performance